I have an np241OR out of a 2006 TJ Rubicon that I swapped into my 1989 Jeep MJ with a Novak cable shifter and a new 2 piece rear shaft. I had to pull the case from the Jeep because I could not get the case to come out of four wheel drive. Even with the cable shifter disconnected and the shift lever manually moved to 2hi the transfer case was still in 4hi. Neutral worked and 4lo worked but it would not come out of 4hi. It eventually did come out once I pulled the case from the truck, thought it was a fluke and put the case back in only to have to same issue after a little driving in 4wd.
I'm not really sure what the problem could be because I've never heard of anyone having the same issue with this case. Could it be something internal or maybe a drive shaft length problem that is causing the case to bind? Thanks for the help!
-Ryan
I'm not really sure what the problem could be because I've never heard of anyone having the same issue with this case. Could it be something internal or maybe a drive shaft length problem that is causing the case to bind? Thanks for the help!
-Ryan
0 commentaires:
Enregistrer un commentaire