Replacement Fog Light Suggestions?

I want to replacement my factory fog lights with something nicer. Any suggestions, I have not seen any in person to make any decisions and hard to pick from a website.

It would be nice to find some thing that i a direct replacement and installs without any mods.

Replacement Fog Light Suggestions?

Purchased first Jeep! - :)

Just purchased a 1988 Cherokee :)

Red, 4dr, 4.0L, 5-spd, 2 previous owners, only 146,472km!

$500, needed fuel pump which i replaced, and thats it!!!

Steal of a deal??

Purchased first Jeep! - :)

Ignition Coil Question

Will this ignition coil work on a '97 Grand Cherokee I6? Amazon says it doesn't, but there is reviews that say it will.

OEM 5183 Ignition Coil http://ift.tt/1UChH2b

Ignition Coil Question

Clutch issues!!! Help??

So I got home earlier and heard a super high pitch screaming grinding noise when I was backing up thought it was a crappy song turnt it off and it was louder. Its my clutch. I think its the throwout bearing.

Well I sprayed water from hose in the bellhousing holes for about 15 minutes and had it to where the water was clean coming out then got wood and held clutch pedal down that way til water was clean again I cleaned the bay to see if anything came out a lot of muddy water and dirt grim came out.

I noticed these pieces also came out. They are black like charcoal and seem to have some shine in them like steel and cooper.

Is it okay to drive a bit until I can get my warranty to fix the tranny from kicking me out of first gear and reverse (go to take off and the shifter is like a shotgun when it drops gear)?

The pieces are strong can't break them with fingers. They also look curved on some parts as if machined.

The jeep shifts fine don't notice it slip when step on it.

Clutch or throwout bearing pieces? Is it safe to drive or will I need a tow truck if I do drive it?

Attached Images

	IMG_20150906_221112_1441605212431.jpg (44.1 KB)
	IMG_20150906_220738_1441605247568.jpg (36.7 KB)

Clutch issues!!! Help??

3 tail light bulbs, 1 doesn't do anything

My 2010 Jeep grand cherokee limited has 3 tail light bulbs: The reverse light, the brake/ turn signal light, and a third right next to the brake/turn signal bulb. What does this third bulb do? I tried everything and can't get it to turn on. If it's where the turn signal or brake light is supposed to come from, does someone know how to rewire it so the assembly works properly? Thanks!

3 tail light bulbs, 1 doesn't do anything

Winter Ready: 34 x 10.5 BFG T/A K02

I wanted a tall yet narrow tire on the JK-8 for getting over Wasatch mountain passes - which will start getting snow the end of this month. The T/A's have the "snowflake symbol" as they are "severe snow service" rated. I usually go wider with a mud tire - but this way I can run the stock rims without spacers or lift. And, the sides of the Jeep will stay cleaner as the tires are well within the fenders, backed up by the Mopar splashguards.



The stock 255/75r17 BFG MT tires measured 31" mounted v. 32.5" for the 34/10.5r17 T/A's. The new spare just clears the bumper indent. Since the new tire only weighs 9 pounds more than the old, I think I can get away with no tailgate reinforcements this time around.



It does not look like it, but there's about 1" clearance between the rear tire and the rock rail. I've cycled the suspension on lifts and have not found clearance issues. The Jeep does have a 1" coil spacer lift on the front - but that's to set the rake where I want it and it was not necessary to fit the tires.



The ride after the swap is good - smooth and not harsh. The T/A's are a "D" rated tire and I'm running them in the low 30's on psi so far.


Bill

Winter Ready: 34 x 10.5 BFG T/A K02

Any good trails in the rock hill York area?

I'm looking for one or two good spots to go wheeling and possibly camping and fishing. I just moved out to rock hill and don't know the area very well but I need to take my yj out and hit the trail it's been too long. Maybe something with a medium difficulty I'm only running 31s with a 1in lift. Anything an hour or so away?

Thanks

Any good trails in the rock hill York area?

Battery issue perhaps

A little problem:

Yesterday I went out and tried to drive the jeep for the first time in a day or two and when I tried to start the jeep there was nothing, no electrics or anything. I tried a couple more times and nothing still.

I popped the hood and looked around and touched (didn't move) the terminals which are corroded just a tad but not real bad and then the jeep started (weird coincidence I think) but the jeep wouldn't stay running without me giving it gas for a little bit then it ran by itself no problem.

Radio lost power due to it now saying "demo mode" like new radios saying. I put my meter on the battery terminals while running and it says 13.64 and that should be good/normal for the XJ. The weird part is that when turned off and the meter on the terminals still the battery states 13.10 and declines very rapidly.

Jeep had a lot of cranking power still but it just won't stay on at first.


Sent from AutoGuide.com Free App

Battery issue perhaps

Help with Metalcloak dual rate springs

I'm installing the metalcloak 3.5" game changer suspension on my 05 TJ. Ran into an a snafu with the front springs. The bottom coil has an internal diameter of 2", and won't fit over the lower spring perch.

Install instructions here: http://ift.tt/1LdAQlQ



Attachment 2369178

Trying to finish this weekend if possible. Thanks for the help!

Attached Images

image-3003110313.jpg (404.6 KB)

Help with Metalcloak dual rate springs

76' CJ7 Build

High all,

I am undertaking a total rebuild of a 1976 CJ7. It had the AMC 258, automatic tranny with quadratrac. I was wanting to get initial opinions about the power train. I would like to keep everything minus the engine. The mission is a toy around the neighbor hood with mild trail riding with the kids. So I don't need a super heavy duty set up, just need to have it mechanical sound.

I was thinking of, having the existing power train looked at / rebuilt as necessary and then for the engine put a Chevy small block in it. I have a frame I just picked up that is ready (with mounts) to go.

So, thinking of the kit to mod the quadratrac to part time 4wd, getting a later model 4L Chevy engine with fuel injection?

Any words of advice/recommendations ?

Scott: 76' CJ-7 Ground up restore

76' CJ7 Build

Post my jeep for sale?

Why will the site not let me post in the for sale area? Seems to want me to upgrade to paid membership, but in the list what paid premiums Get over normal membership I don't see it list if you can post in the for sale area even if I pay for membership.

Post my jeep for sale?

Zj tranny solenoid swap need quick answer!

Ok my solenoids were bad I'm my zj. I got a used transmission and I no for a fact it was perfect before I got it. It was my in laws jeep. Anyway pulled solenoids from spare tranny and the filter was a 2 bolt. My filter is a 3 bolt. Idk how much that matters just curious and wonder if it matters in the fact that the solenoids should be the same correct? Came out of a 97 zj just like mine.

Zj tranny solenoid swap need quick answer!

mixed up gear oil. dumb

Like a dummy I put one q of 75-140 and one of75-90. I don't tow stuff. Is that a problem
Should I drain it or go with it?

mixed up gear oil. dumb

89 yj wrangler 5 speed

Having problems when my jeep throttle quitting when jeep heats up all suggestions welcome thank u

89 yj wrangler 5 speed

Waterstains in roofliner

Went to vacuum the 'reliable' 2006 Overland tonight. So, looked at the roof liner and noticed watermarks 2/3rds of the way back from the sunroof. No obvious leak from the roofrack bolts but is finally buck the truck showing signs of age. Any suggestions? Uk owner

Waterstains in roofliner

Passenger Side Mirror Glass Shaking

My passenger side mirror glass shakes badly when driving, particularly on the highway. The plastic is firm without any problem. Can this be fixed without replacing the whole assembly?

I see on some cars the glass is held on with adhesive, so if that is the case, I understand I can just pry the glass off and use some new adhesive to avoid the shaking. However, I do not want to break anything if that isn't the case on the Commander.

Ideas?

Passenger Side Mirror Glass Shaking

CEL on, but no code?

2001 Grand Cherk 4.7l

Got a CEL after hitting seriously rough patch of road and checked with a scanner. No code. Watched fuel trims, and ST Bank 2 bouncing from -2.0 to +33%. Bank 1 ST normal, and both LT normal.

Disconnected battery to reset CEL and hope the next time a code wold be present.

CEL on again, and again no code.

Any thoughts on why CEL coming on, but no code is setting?

Thanks

CEL on, but no code?

Ignition Lock Cylinder Replacement Problem

I replaced the ignition lock cylinder on my 2003 wrangler - all is well with the starter and other intermittent electrical problems but now the key in ignition chime goes on every time I open the door even when key is not left in the ignition. is there a way to fix this?

Ignition Lock Cylinder Replacement Problem

4.0L swap fuel pump/ regulator questions

I see many posts about the fuel pump but not much about the fuel regulator. I know many people use the e2000 pump but what about the regulator? I know the e2000 puts out more pressure than needed, what do you guys do to get the correct pressure?

Thanks

4.0L swap fuel pump/ regulator questions

Jeep WK2 Overland 20in Wheels with Tires

These have less than 1000miles on them. Super clean. No dings, or curb damage, tires are basicallyfull tread. Wheels are off a new overland WK2. 20in wheels with 265 50 R20 Goodyear Fortera tires. TPMS are included as well

Shipping is at your expense. I can box them up and do some sort of ground shipping but the logistics are on you. my Zip is 98007. Asking price is 1200.00

Will take trade for other wheels that are 20in mainly interested in something black and with a low offset if possible to fit a WK1.

Payment can be made via Bank of America Money Send, or Paypal.

Jeep WK2 Overland 20in Wheels with Tires