Hello, I'm new to the forum , but need some help with my stock ZJ.
I recently had the death wobble and replaced a loose tie rod end. Put everything back together and drove around fine for a month. Now it seems to be wobbling a bit again when the road curves around to the left. Not on a full left hand turn just slight curves.
I've checked everything time and time again to see what's loose, nothing...
However, I did notice the sway bar was rubbing inside the wheel well on the driver's side. I replaced the bushings on the top of the sway bar link, but it's still rubbing only on hard right hand turns.
With the Jeep up on jack stands I can move the sway bar about half an inch or more from left to right. Should that move?
Are the two related, if so, how? What should I replace?
I recently had the death wobble and replaced a loose tie rod end. Put everything back together and drove around fine for a month. Now it seems to be wobbling a bit again when the road curves around to the left. Not on a full left hand turn just slight curves.
I've checked everything time and time again to see what's loose, nothing...
However, I did notice the sway bar was rubbing inside the wheel well on the driver's side. I replaced the bushings on the top of the sway bar link, but it's still rubbing only on hard right hand turns.
With the Jeep up on jack stands I can move the sway bar about half an inch or more from left to right. Should that move?
Are the two related, if so, how? What should I replace?
NOT the DW, slight shimmy...
0 commentaires:
Enregistrer un commentaire