Internal to external slave swap check list (AX-5)

Ok, I am proceeding with the parts collection to change over to an external slave on m 87 Jeep with 2.5/AX5 and need to confirm all the parts needed.



I bought a used bell housing from ebay that is external type for the AX-5 trans for $50



Haven't found a used front bearing retainer yet but they are available new if I have to go that route. (quite costly!)



Other parts I will get:



clutch fork spring

http://ift.tt/1BuhKYX



clutch fork

http://ift.tt/1BuhM2Z



clutch fork pivot ball

http://ift.tt/1BuhM31



slave cylinder

http://ift.tt/1ACoRJv



front transmission bearing seal

http://ift.tt/1BuhM35





Going to get a new clutch kit for a "1994" wrangler. This will include clutch disc, pressure plate, throw out bearing and pilot bushing.



Questions:

Will I be able to use my new clutch master cylinder that was for the internal slave set up? Thought I read where the line might be an issue?



Have I missed anything?





Thanks for any help,



Bob